Screenshot 2025-10-12 204150.png
1000014176.jpg
1000014175.jpg
Screenshot 2025-10-12 204150.png
1000014176.jpg
1000014175.jpg

3D Printed Frag Plug - Print Your Own

$7.99

A 23mm frag plug 3D print MODEL. Recommended to use PETG filament for long-term aquarium use as it combines durability, low water absorption, and excellent chemical resistance. Standard 23mm diameter top that accepts coral frags, a tapered stem sized for common frag racks and rockwork, and a textured surface to encourage tissue attachment and glue adhesion.

A 23mm frag plug 3D print MODEL. Recommended to use PETG filament for long-term aquarium use as it combines durability, low water absorption, and excellent chemical resistance. Standard 23mm diameter top that accepts coral frags, a tapered stem sized for common frag racks and rockwork, and a textured surface to encourage tissue attachment and glue adhesion.

Key Features

  • Size 23mm top diameter; 8.5mm stem compatible with standard frag racks.

  • Surface Textured top for better glue and tissue adhesion.

  • Durability Resists cracking and warping in aquarium conditions.

  • Finish Clean, consistent 3D print quality with minimal post-processing required.

Specifications

  • Top diameter 23mm.

  • Material PETG Recommended

  • Typical stem length 15mm

  • Color options N/A

  • Compatibility Fits most standard frag racks and rock plug holes.

Packaging Options and Pricing Packs

  • Digital Download Only

Usage and Care

  • Installation Use coral-safe cyanoacrylate glue or epoxy to attach frags to the plug; allow glue to set before introducing to strong flow.

  • Placement Start in low-to-moderate flow and move to permanent location after tissue recovery.

  • Handling Avoid excessive mechanical stress to the stem during insertion or removal if intending to keep the stem.

  • Removing the stem The stem can be easily removed with a tool to snap it at its joint with the 23mm plug. This may be desirable for permanent placement in the aquarium.